The latest feed-in technology and robust turbine construction

Highest efficiency – this is what the turbine construction of the eno 100 stands for. Based on the tried and tested platform eno 92, the wind turbine has the ideal combination of compactness, solid machine construction and increased yield with a rotor diameter of 100 metres and thus around 18 percent more rotor surface area. The design of the eno 100 takes into account the maximum utilisation of low-wind locations in particular. Our own developed controls and the modern full-scale converter technology guarantee sure operation in demanding networks.

Technical specifications

eno100

2,2 MW

IEC IIIA

General
Rated Power2.200 kW
Cut-in wind speed3 m/s
Rated wind speed12 m/s
Cut-out wind speed25 m/s
Tilt angle
Rotor
Diameter100.5 m
Nominal speed range5.5 – 14.2 rpm
Swept area7,933 m²
Rotor blade
ManufacturerLM Wind Power
MaterialGFK
Length49 m
Generator
TypePlanetary-/spur gearing
Gear ratioapprox. 1:111
Generator
TypeSynchronous generator
Designslip ringless / brushless excitation
Tower (hub height)
 99 m, 125 m
Converter
TypeFull power converter
ModelModular IGBT inverter topology
Sound power level
calculated (Mode 0)1105.9 dB(A)
Wind class
Hub height89 m   125 m
Wind class according to IEC ed.3IIIA        IIIA
Wind zone according to DIBt 2012

WZ 3   WZ 3
GK II     GK II

1 noise-reduced operation modes available on request

Power curve

eno100

2,2 MW

IEC IIIA

Estimated annual energy yield2
vw, hub heightyield in  MWh/a
5,0 m/s3.780 
5,5 m/s4.776 
6,0 m/s5.778 
6,5 m/s6.755 
7,0 m/s7.687 
7,5 m/s8.560

2 annual energy yields valid for k = 2.0 (Weibull distribution)

Your point of contact

Our experts are happy to help you further.

eno energy systems GmbH

+49 381 203 792-0
Write email